1. Open the socket by pushing the lever handles down and away from the socket to release the load plate. (Figure 22, ("A"
and "B")
2.
Unlock the hinge lever first to a 35º angle only and then the action lever (Figure 23, (A).
The action lever will also raise the hinge lever so that the load page is upright. Then lift up the load plate.
Removing the Processor
1.
Use the Intel tool to remove the processor from the socket or gently remove the processor manually.
Installing a New Processor
: Follow the ESD precautions covered in Appendix A: Safety Information".
NOTE
1.
Take the processor out of its packaging and remove the protective shipping cover by grasping the cover tab and pulling it
away from processor load plate. Store the protective cover for future use. (Figure 24)
44
Figure 22: Using the Socket Levers
Figure 23: Opening the Load Plate
Installation and Maintenance Guide
www.kontron.com