E) Disconnecting Cables; Figure 11: Removing The Support Cross Bar From The Chassis - Kontron CG2300 Installation And Maintenance Manual

Installation and Maintenance Guide

Figure 11: Removing the Support Cross Bar from the Chassis

4.6

(E) Disconnecting Cables

Cables must be disconnected in order to do several different tasks inside the CG2300 server. Figure 12 and Table 1 show all of
the cable connections in the system.
Before you can disconnect any internal cables, you first must power down the server and remove all peripheral devices and power
cord(s) and then remove the chassis cover. For instructions, see (A) in Chapter 4.
27 www.kontron.com