4.3.2
(B2) Removing the Right Riser Card Assembly
Before you can remove the right riser card assembly, you first must power down the server and remove all peripheral devices and
the power cord(s) and then the chassis cover. For instructions, see (A) in Chapter 4.
1.
Loosen the two blue captive retention screws (Figure 8, "A") at the front of the riser assembly and the blue captive
screw at the rear of the chassis ("B").
2.
Using the two blue touch points ("C"), lift the riser card assembly out of the chassis ("D").
23
Figure 7: Left Riser Card Assembly
Installation and Maintenance Guide
www.kontron.com