4.
Install the new drive in the drive carrier (Figure 3, "A") and secure the drive with the four screws that come with the carrier
(with 4 lbs-in torque, max). ("B")
5.
With the drive carrier locking lever fully open, push the hard drive carrier into the drive slot in the chassis until it stops.
(Figure 4 "A")
6.
Press the locking lever until it snaps shut and secures the drive in the slot. (Figure 4 "B")
If this is the last task you are doing, replace the front bezel. See (RA) in Chapter 6.
18
Figure 3: Installing a Hard Drive
Figure 4: Inserting a New Hard Drive into the Chassis
Installation and Maintenance Guide
www.kontron.com