Figure 43: Fan Control Board Layout - Kontron CG2300 Installation And Maintenance Manual

Installing the New FCB
To install the new fan control board:
1. Using the five screws saved from removing the old board, fasten the new fan control board to the chassis floor. (Figure
43).
2. Re-connect the fan control cables. For instructions, see (RD) in Chapter 6.
3. Re-install the fan cage, the baseboard power cables, the support cross bar, and the chassis cover. For instructions, see
(RC), (RG), (RH), and (RJ) in Chapter 6.
4. If this is the last task you are performing inside the server chassis, plug in the power cord(s), and re-attach any
peripheral devices.
65

Figure 43: Fan Control Board Layout

Installation and Maintenance Guide
www.kontron.com