C) Removing The Processor Air Duct; Figure 8: Right Riser Card Assembly - Kontron CG2300 Installation And Maintenance Manual

Installation and Maintenance Guide

Figure 8: Right Riser Card Assembly

4.4

(C) Removing the Processor Air Duct

The black plastic processor air duct must be removed to access the processors and the memory DIMMs or to replace the server
board.
NOTE: The air duct is required to ensure proper air flow within the chassis, so be sure that it is in place again before re-installing
the chassis cover.
Before you can remove the processor air duct, you first need to power down the server and remove all peripheral devices and
power cord(s) and then the chassis cover and right riser card assembly. For instructions, see (A and (B2) in Chapter 4.
To remove the processor air duct, simply lift the air duct straight up out of the chassis.
24 www.kontron.com