:
CAUTION
The underside of the processor has components that may damage the socket pins if installed improperly. The
processor must align correctly with the socket opening before installation.
2.
Use the Intel stage tool and insertion-removal tool to move the processor to the socket on the server board.
3.
Line up the insertion/removal tool with the pin 1 indicators on the socket and make sure the tool is properly seated at all
four corners.
4.
Press straight down using the tool button. A click indicates that the processor is loaded into the socket.
Or if not using the tools:
1.
Orient the processor with the socket so that the processor cutouts match the socket notches. (Figure 25, "A")
2.
Gently place the processor in the socket. ("B")
45
Figure 24: Removing the Shipping Cover
Installation and Maintenance Guide
www.kontron.com