Installing The Supercap Battery Backup Module; Figure 31: Installing The Raid Controller Board - Kontron CG2300 Installation And Maintenance Manual

5.2.8

Installing the SuperCap Battery Backup Module

This module is a flash-based battery backup module for SAS drives. It comes as a part of the Intel RS3DC080 RAID controller kit
and may not be compatible with other RAID products. The mounting bracket for the module is a separately orderable part (Intel
AXXRMFBU4). For more information about the battery backup module, see the
located on the Kontron support website at http://cbu.kontron.ca. (CRMS – CG2300 – Ordering Guide.)
Before you can install the battery backup module, you need to remove the chassis cover and left riser card assembly. (That is, if
they haven't already been removed for installing the hardware RAID controller board). For instructions, see (A) and (B1) in
Chapter 4.
To install the battery backup module:
1. Insert the module into the black plastic tray. (Figure 32, "A")
2. Fasten the module and tray assembly to the sheet metal bracket by inserting the tabs into the cut-outs on the bracket.
("B")
51

Figure 31: Installing the RAID Controller Board

Installation and Maintenance Guide
CG2300 Carrier Grade Server Configuration Guide
www.kontron.com