For more information about ordering this tool for use on the LGA 2011 socket, see the Intel support site at
http://www.intel.com/support/motherboards/server/sb/CS-032587.htm. The tool should be ordered from Chaun Choung
Technology Corporation ( CCI ). See more information at http://www.ccic.com.tw/lga.php.
In addition to using the correct tool, also be mindful of the following points when handling the processors and sockets to reduce
the risk of electrostatic discharge (ESD) damage to the processor:
»
Touch the metal chassis before touching the processor or server board.
»
Keep part of your body (hand, etc.) in contact with the metal chassis to dissipate the static charge while handling the
processor.
»
Avoid moving around unnecessarily.
»
Use a ground strap attached to the front panel (with the bezel removed.)
42
Figure 19: Using the Insertion-Removal Tool to Handle Processors
Installation and Maintenance Guide
www.kontron.com