2/
EXTRACTING AND INSERTING AN MSP-NODE
2.1. EXTRACTING AN MSP-NODE
ESD Sensitive Device!
Take all necessary ESD protection measures.
Steps in
1.
Press the power button of the MSP-Node to be extracted. (The power button should be configured in the operating
system so that it performs a clean shutdown when pressed.)
2.
The ID LED of the MSP-Node becomes steady blue: the node is ready to be extracted.
3.
To extract the MSP-Node from the slot, pull on the handle while pressing the safety lock (Figure 8) towards the left.
Figure 8: Processor MSP-Node safety lock location
2.2. INSERTING AN MSP-NODE
blue
apply only to hot swap procedures.
www.kontron.com
MSP8020 Series User Guide Rev. 1.1
// 20