Installing A 3.5" Hdd Module; Figure 12: Installing 3.5" Hdd - Kontron ZINC CUBE C232 User Manual

4.5. Installing a 3.5" HDD Module

To install a 3.5" HDD module:
1. Open the front panel.
2. Remove the HDD assembly from the chassis.
3. Align the HDD in the HDD carrier with the connectors facing the opening of the carrier.
4. Secure the HDD and the HDD carrier with screws.

Figure 12: Installing 3.5" HDD

5. Install the HDD assembly in the chassis.
6. Close the front panel.
www.kontron.com
ZINC CUBE C232 - Rev. 1.0
// 27