Taking Out Of Operation/Dismantling; Taking Out Of Operation; Dismantling/Disposal - Leibinger JET3 up Operating Manual

Group 10

11 Taking out of operation/Dismantling

11.1 Taking out of operation

The ink and solvent which still remains in the high performance printer have to be
removed. For this a special draining routine is available.
You will find further information regarding the procedure of draining in
the service documentation.
Dangerous material in the machine!
Protective equipment is necessary! Read the safety data sheets and
the personal protective equipment rules and regulations!
Now the high performance printer has to be turned off and disconnected from the
mains supply. Further more you have to disconnect possible connected additional
devices. You will find the capabilities of connecting on the back side of the device.
You have to follow the instructions of the several devices!
Finally you have to cleanse the device of dirt, ink rests etc. as described in the
chapter Cleaning.

11.2 Dismantling/Disposal

The LEIBINGER JET3up has been developed and built with materials that ensure
problem-free dismantling and disposal. When dismantling, the information in the
service documentation as well as the respective country specific disposal regulations
(e.g. for inks and solvents) must be taken into consideration
JET3up
Setting-up/Maintenance
INFORMATION
WARNING
Page 381
Release R1.06