Product Counter; Figure 84 - Call Up Product Counter Menu - Leibinger JET3 up Operating Manual

Group 8
Proceeding
 Click on the menu item <Extra> (1) and select the option <Test Print> (2) or
click on the accordant direct buttons (shortcut) (3).
 A confirmation prompt (4), pops up
 Confirm by pressing the <OK> button (5) or cancel the process with the
<Cancel>button (6).
 A message (7), that the test print-job is loaded pops up.
 Confirm the message with the <OK> button (5). The job is now loaded and
ready for to be printed.

7.5.2 Product counter

For the production counter options select the menu item <Product Counter> (2) in
the <Extra> drop down menu (1). Select an option from the submenu.
The following options are available:
 Stop after x Products
 Reset all Job counters
Figure 84 Open product counter dialog box
3
4
5
6
7
1 – Drop down menu <Extra>
2 – Menu item <Product Counter>
3 – Option <Stop after x Products>
4 – Open <Product Counter Settings>
JET3up
Job Editor
 Product Counter Settings
 Delete extern text memory
1
5 – Option <2. product counter>
6 – Option <Reset all Job counters>
7 – Option <Delete ExternText
memory>
 2. Product Counter
2
Release R1.06
Page 187