Setting Auto Clear Time; Switching Copy Operation At Toner Empty Detection - Kyocera KM-3035 Service Manual

Maintenance
item No.
U255

Setting auto clear time

Description
Sets the time to return to initial settings after copying is complete.
Purpose
To be set according to frequency of use. Set to a comparatively long time for continuous copying at the same
settings, and a comparatively short time for frequent copying at various settings.
Method
Press the start key. The current setting is displayed.
Setting
1. Change the setting using the cursor up/down keys.
Description
Auto clear time
The setting can be changed by 30 s per step.
When set to 0, the auto clear function is cancelled.
2. Press the start key. The value is set, and the screen for selecting a maintenance item No. is displayed.
Completion
To exit this maintenance item without changing the current setting, press the stop/clear key. The screen for
selecting a maintenance item No. is displayed.
U258

Switching copy operation at toner empty detection

Description
Selects if continuous copying is enabled after toner empty is detected, and sets the number of copies that can
be made after the detection.
Method
Press the start key. The current setting is displayed.
Setting
1. Select single or continuous copying. The selected item is displayed in reverse.
Display
SINGLE
CONTINUE
Initial setting: SINGLE
2. Set the number of copies that can be made using the cursor up/down keys.
Description
Number of copies after toner empty detection
The setting can be changed by 5 copies per step.
When set to 0, the number of copies is not limited regardless of the setting for single or continuous copying.
3. Press the start key. The setting is set, and the screen for selecting a maintenance item No. is displayed.
Completion
To exit this maintenance item without changing the current setting, press the stop/clear key. The screen for
selecting a maintenance item No. is displayed.
Description
Setting range Initial setting
0 to 270 90
Description
Enables only single copying.
Enables single and continuous copying.
Setting range
0 to 200 (copies)
2FD/2FF/2FG
Initial setting
70
1-4-55