Checking Messages; Setting The Finisher - Kyocera KM-3035 Service Manual

Maintenance
item No.
U245

Checking messages

Description
Displays a list of messages on the touch panel of the operation panel.
Purpose
To check the messages to be displayed.
Method
1. Press the start key.
2. Select the item to be displayed.
3. Change the screen using the cursor up/down keys to display each message one at a time.
When a message number is entered with the numeric keys and then the start key is pressed, the message
corresponding the specified number is displayed.
Completion
Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.
U246

Setting the finisher

Description
Adjusts various items if the machine is equipped with an optional finisher.
3000-sheet finisher: Adjusts the amount of slack in the paper in punch mode.
Booklet stitcher: Adjusts the booklet stapling position for each paper size.
Built-in finisher: Adjusts the side registration cursor stop position in the staple sort mode.
Purpose
Adjusts the amount of slack in the paper while in the punch section if, in punch mode, paper jams or is Z-folded
frequently due to too much slack in the paper, or, the position of punch holes varies due to too little slack in the
paper.
Adjusts the booklet stapling position in the stitching mode if the position is not proper.
To adjust when registration is not proper or staple position is shifted in the staple sort mode.
Start
1. Press the start key. The screen for selecting an item is displayed.
2. Select the item to be set and press the start key. The screen for executing each item is displayed.
Display
3000 FINISHER
SADDLE FINISHER
INNER FINISHER
Setting the amount of slack in the paper
1. Change the setting using the cursor up/down keys.
Description
Amount of slack in the paper
If the position of punch holes varies, increase the setting to make the amount of slack larger.
If paper jams or is Z-folded frequently, decrease the setting to make the amount of slack smaller.
2. Press the start key. The value is set.
3. To return to the screen for selecting an item, press the stop/clear key.
Setting the booklet stapling position
1. Select the size to be set. The selected item is displayed in reverse.
2. Change the setting using the cursor up/down keys.
Display
A4R/LTR
B4R
A3R/LDR
Description
Adjustment of the amount of slack in the paper in punch mode
Adjustment of the booklet stapling position
Side registration cursor stop position
Setting range
-15 to +15
Description
Adjustment of booklet stapling
position for A4R/LTR size
Adjustment of booklet stapling
position for B4R size
Adjustment of booklet stapling
position for A3R/LDR size
Description
Initial setting
0
Setting range Initial setting
–125 to +125 0
–125 to +125 0
–125 to +125 0
2FD/2FF/2FG
Change in value
per step
0.25 mm
0.25 mm
0.25 mm
1-4-49