Checking The Paper Ejection To Optional Devices; Setting The Maintenance Cycle - Kyocera KM-3035 Service Manual

2FD/2FF/2FG
Maintenance
item No.
U249

Checking the paper ejection to optional devices

Description
Ejects paper to an optional mailbox or job separator, or to the ejection slot at the machine left.
Purpose
To check paper conveying operation to optional paper eject devices or the ejection slot at the machine left.
Method
1. Press the start key. The screen for selecting an item is displayed.
2. Select the paper eject location.
Display
MAIL
JOB SEPARATOR
LEFT BIN OUTPUT
3. When selecting the mailbox, specify the mail tray number (1 to 7) to which paper is to be ejected by using
the cursor up/down keys. If 0 is selected, paper is ejected to the mail trays in ascending order from mail tray
1 to mail tray 7 repeatedly.
Interrupt copy mode
While this maintenance item is being performed, copying from an original can be made in interrupt copy mode.
Completion
Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.
U250

Setting the maintenance cycle

Description
Displays and changes the maintenance cycle.
Purpose
To check and change the maintenance cycle.
Method
Press the start key. The current setting is displayed as follows:
Setting
1. Change the setting using the numeric keys.
Description
Maintenance cycle
2. Press the start key. The value is set, and the screen for selecting a maintenance item No. is displayed.
Completion
To exit this maintenance item without changing the current setting, press the stop/clear key. The screen for
selecting a maintenance item No. is displayed.
1-4-52
Description
Paper eject device
Mailbox
Job separator
Ejection slot at the machine left (finisher not installed)
Setting range Initial setting
0 to 9999999 400000 (30 cpm), 500000 (40/50 cpm)