2FD/2FF/2FG
1-3-10 Installing the Scanning System (option)
Procedure
1. Remove 13 screws and take off the rear
cover.
• If the printing system is installed
2. Remove the 2 screws holding the printer
system in place, and pull the printing system
out of the shield cover.
3. Remove 13 screws and take off the shield
cover.
1-3-36
Figure 1-3-77
Printer system
Screws
Figure 1-3-78
Figure 1-3-79
Rear cover
Shield cover
Screws