Kyocera KM-3035 Service Manual page 189

Problem Causes/check procedures
(15) Defective feed switch 3.
A paper jam in the
paper feed section
is indicated during
Check if the feed pulleys
copying (multiple
and feed roller are de-
sheets in copier ver-
formed.
tical conveying sec-
tion).
Jam code 22
(16) Broken bypass feed switch
A paper jam in the actuator.
paper feed section
Defective bypass feed
is indicated during
switch.
copying (multiple
sheets in bypass
conveying section).
Jam code 23 Defective registration
switch.
(17) Defective registration
A paper jam in the switch.
paper conveying
section is indicated
during copying
Check if the registration
Jam code 05
clutch malfunctions.
Electrical problem with the
registration clutch.
(18) Broken feed switch 1 ac-
A paper jam in the tuator.
paper conveying
Defective feed switch 1.
section is indicated
during copying (jam
in registration/trans-
fer section). Defective registration
Jam code 30 switch.
(19) Broken eject switch actua-
A paper jam in the tor.
fixing section is indi-
Defective eject switch.
cated during copy-
ing (jam in fixing
section).
Jam codes 40 to 44,
46 and 47 Broken feedshift switch
actuator.
Defective feedshift switch.
Corrective measures
Run maintenance item U031 and turn feed switch 3 on and off
manually. Replace feed switch 3 if indication of the correspond-
ing switch on the operation panel is not displayed in reverse.
Check and repair if necessary.
Check visually and replace the bypass feed switch if its actuator
is broken.
Run maintenance item U031 and turn the bypass feed switch on
and off manually. Replace the bypass feed switch if indication of
the corresponding switch on the operation panel is not displayed
in reverse.
Run maintenance item U031 and turn the registration switch on
and off manually. Replace the registration switch if indication of
the corresponding switch on the operation panel is not displayed
in reverse.
Run maintenance item U031 and turn the registration switch on
and off manually. Replace the switch if indication of the corre-
sponding switch on the operation panel is not displayed in re-
verse.
Run maintenance item U032 and select the registration clutch
on the operation panel to be turned on and off. Check the status
and remedy if necessary.
Check (see page 1-5-49).
Check visually and replace feed switch 1 if its actuator is broken.
Run maintenance item U031 and turn feed switch 1 on and off
manually. Replace feed switch 1 if indication of the correspond-
ing switch on the operation panel is not displayed in reverse.
Run maintenance item U031 and turn the registration switch on
and off manually. Replace the registration switch if indication of
the corresponding switch on the operation panel is not displayed
in reverse.
Check visually and replace the eject switch if its actuator is bro-
ken.
Run maintenance item U031 and turn the eject switch on and off
manually. Replace the eject switch if indication of the corre-
sponding switch on the operation panel is not displayed in re-
verse.
Check visually and replace the feedshift switch if its actuator is
broken.
Run maintenance item U031 and turn the feedshift switch on
and off manually. Replace the feedshift switch if indication of the
corresponding switch on the operation panel is not displayed in
reverse.
2FD/2FF/2FG
1-5-15