Kyocera KM-3035 Service Manual page 179

Section Jam code
Fixing sec- 42
tion
43
44
46
47
Eject sec- 50
tion
51
Feedshift 52
section
Optional 53
switchback
unit
Description
Misfeed in fixing section
(lower drawer)
Misfeed in fixing section
(paper feeder upper
drawer)
Misfeed in fixing section
(paper feeder lower
drawer)
Misfeed in fixing section
(large paper deck)
Misfeed in fixing section
(duplex section)
Misfeed in eject section
Misfeed in job separator
eject section
Misfeed in feedshift sec-
tion
Misfeed in switchback
section
The eject switch (ESW) does not turn on within 2898 ms of
the registration clutch (RCL) turning on.
The feedshift switch (FSSW) does not turn on within 2983
ms of the registration clutch (RCL) turning on.
The eject switch (ESW) does not turn on within 2898 ms of
the registration clutch (RCL) turning on.
The feedshift switch (FSSW) does not turn on within 2983
ms of the registration clutch (RCL) turning on.
The eject switch (ESW) does not turn on within 2898 ms of
the registration clutch (RCL) turning on.
The feedshift switch (FSSW) does not turn on within 2983
ms of the registration clutch (RCL) turning on.
The eject switch (ESW) does not turn on within 2898 ms of
the registration clutch (RCL) turning on.
The feedshift switch (FSSW) does not turn on within 2983
ms of the registration clutch (RCL) turning on.
The eject switch (ESW) does not turn on within 2898 ms of
the registration clutch (RCL) turning on.
The feedshift switch (FSSW) does not turn on within 2983
ms of the registration clutch (RCL) turning on.
The eject switch (ESW) does not turn off within 2898 ms of
the registration switch (RSW) turning off.
The eject switch (ESW) does not turn off within 2898 ms of
the registration clutch (RCL) turning on.
The job separator eject switch (JBESW) does not turn on
within 2050 ms of the feedshift switch (FSSW) turning on.
The job separator eject switch (JBESW) does not turn off
within 2050 ms of the feedshift switch (FSSW) turning off.
The job separator eject switch (JBESW) does not turn off
within 2050 ms of the feedshift switch (FSSW) turning on.
The feedshift switch (FSSW) does not turn on within 873 ms
of the start of eject motor (EM) reverse rotation.
During paper switchback operation, the feedshift switch
(FSSW) does not turn off within the time required to convey
the length of the used paper size plus 317 ms of turning on.
The feedshift switch (FSSW) does not turn off within 2898
ms of the registration switch (RSW) turning off.
The feedshift switch (FSSW) does not turn off within 2898
ms of the registration clutch (RCL) turning on.
The switchback eject switch (SBESW) does not turn off
within 1421 ms (2797 ms) of the feedshift switch (FSSW)
turning on.
The switchback eject switch (SBESW) does not turn on
within 1421 ms (2797 ms) of the feedshift switch (FSSW)
turning on.
2FD/2FF/2FG
Conditions
1-5-5