U072 Adjusting The Dp Center Line -3/2/-3 - Kyocera KM-3035 Service Manual

Maintenance
item No.
U072 Adjusting the DP center line
Description
Adjusts the scanning start position for the DP original.
Purpose
To be executed if there is a regular error betw een the centers of the original and the copy image when the
optional DP is used.
Caution
Before making this adjustment, ensure that the following adjustments have been made in maintenance mode.
U034 U067
Method
Press the start key. The screen for executing is displayed.
Setting
1. Select the item to be set. The selected item is displayed in reverse.
2. Change the setting using the cursor up/down keys.
Display
1 sided
2 sided front
2 sided back
Increasing the setting moves the image to the right, and decreasing it moves the image to the left.
2. Press the start key. The value is set.
Interrupt copy mode
While this maintenance item is being performed, copying from an original can be made in interrupt copy mode.
Adjustment
1. In interrupt copy mode, make a copy using the DP .
2. Check the copy image and adjust the center line as follows.
For copy example 1, increase the setting.
For copy example 2, decrease the setting.
Completion
Press the stop/clear key at the screen for selecting an item. The screen for selecting a maintenance item No . is
displayed.
U072
Description
Simplex copy mode
Front face in duplex copy mode
Reverse face in duplex copy mode –39 to +39
Reference
Original
Description
Setting range Initial setting
–39 to +39
–39 to +39
Copy Copy
example 1 example 2
Figure 1-4-3
2FD/2FF/2FG-3.0
Change in
value per step
–3 0.17 mm
2 0.17 mm
–3 0.17 mm
1-4-27