Auto Continue Setting; Setting The Auto Continue Recovery Time - Kyocera FS C8026N Operation Manual

Color page printer
Table of Contents

Advertisement

3.13 Other Modes
5 5 5 5
Press the ENTER key. A blinking question mark (?)
appears.
>Buzzer
? Off
6 6 6 6
Select On or Off using the
7 7 7 7
Press the ENTER key.
8 8 8 8
To exit the menu selection, press the MENU key.

3.13.8 Auto Continue Setting

When Auto Continue is enabled, the printer will automatically
print the next received data following a preset amount of time
passes after any one of the following errors occurs:
[Memory overflow Press GO]
[Print overrun Press GO]
[KPDL error Press GO]
[File not found Press GO]
[RAM disk error Press GO]
[MemoryCard err Press GO]
[Hard disk err Press GO]
[Duplex disabled Press GO]
[Add Staple Press GO]
[Chad box full Press GO].
If one of the above errors is caused by someone on a network
where the printer is being shared, for example, data sent from
another person will be printed after a preset amount of time.
The default Auto Continue setting is Off (disabled).
For setting the auto continue recovery time,
see the next section.
Note
1 1 1 1
Press the MENU key.
2 2 2 2
Press the
or
appears.
Others
3 3 3 3
Press the
key
4 4 4 4
Press the
or
Continue > appears.
>Auto Continue >
Mode
Off
or
key.
key repeatedly until Others >
>
key repeatedly until Auto
5 5 5 5
Press the ENTER key. A blinking question mark (?)
appears.
>Auto Continue
Mode ? Off
6 6 6 6
Select On or Off using the
7 7 7 7
Press the ENTER key.
8 8 8 8
To exit the menu selection, press the MENU key. The
display returns to Ready.
3.13.9 Setting the Auto Continue
Recovery Time
Follow the procedure given below to change the recovery
time for Auto Continue.
1 1 1 1
Press the MENU key.
2 2 2 2
Press the
or
appears.
Others
3 3 3 3
Press the
key.
4 4 4 4
Press the
or
Continue Mode > appears.
>Auto Continue >
Mode
5 5 5 5
Press the
key and display >> Auto Continue
Timer. The default setting is 30 seconds.
>>Auto Continue
Timer
6 6 6 6
Press the ENTER key. A blinking cursor (_) appears.
>>Auto Continue
Timer
3-62
or
key.
key repeatedly until Others >
>
key repeatedly until Auto
On
030sec.
030sec.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fs-c8008nFs-c8026n-aFs-c8026n-bFs-c8026n

Table of Contents