Kyocera KM-3035 Service Manual page 178

2FD/2FF/2FG
Section Jam code
Paper feed 21
section
22
23
Paper con- 05
veying
section
30
Fixing sec- 40
tion
41
1-5-4
Description
Multiple sheets in copier
paper feed section
Multiple sheets in copier
vertical conveying sec-
tion
Multiple sheets in bypass
vertical conveying sec-
tion
Secondary paper feed
does not start.
Misfeed in registration/
transfer section
Misfeed in fixing section
(bypass)
Misfeed in fixing section
(upper drawer)
Feed switch 3 (FSW3) does not turn off within the time re-
quired to convey the length of the used paper size plus 635
ms of turning on.
The desk feed switch (DFSW) does not turn off within the
time required to convey the length of the used paper size
plus 635 ms of turning on.
The bypass feed switch (BYPFSW) does not turn off within
the time required to convey the length of the used paper size
plus 1123 ms of turning on.
Feed switch 1 (FSW1) does not turn off within 841 ms of the
upper paper feed clutch (PFCL-U) turning on.
Feed switch 2 (FSW2) does not turn off within a specified
time of the lower paper feed clutch (PFCL-L) turning on.
Feed switch 3 (FSW3) does not turn off within a specified
time of paper feed clutch 1 (PFCL1) turning on.
Feed switch 3 (FSW3) does not turn off within a specified
time of the desk upper paper feed clutch (DPFCL-U) turning
on.
The bypass feed switch (BYPFSW) does not turn off within
1730 ms of the bypass paper feed clutch (BYPPFCL) turning
on.
Feed switch 1 (FSW1) does not turn off within 1910 ms of
feed switch 2 (FSW2) turning off.
Feed switch 2 (FSW2) does not turn off within 1203 ms of
feed switch 3 (FSW3) turning off.
Feed switch 1 (FSW1) does not turn off within 1910 ms of
feed switch 2 (FSW2) turning on.
Feed switch 2 (FSW2) does not turn off within 1203 ms of
feed switch 3 (FSW3) turning on.
The registration switch (RSW) does not turn off within 1510
ms of the bypass feed switch (BYPFSW) turning off.
The registration switch (RSW) does not turn off within 1505
ms of the bypass feed switch (BYPFSW) turning on.
Secondary paper feed does not start within 30 s of arrival of
paper at the registration section.
The registration switch (RSW) does not turn off within 1657
ms of feed switch 1 (FSW1) turning off.
The registration switch (RSW) does not turn off within 1657
ms of feed switch 1 (FSW1) turning on.
The eject switch (ESW) does not turn on within 2898 ms of
the registration clutch (RCL) turning on.
The feedshift switch (FSSW) does not turn on within 2983
ms of the registration clutch (RCL) turning on.
The eject switch (ESW) does not turn on within 2898 ms of
the registration clutch (RCL) turning on.
The feedshift switch (FSSW) does not turn on within 2983
ms of the registration clutch (RCL) turning on.
Conditions