Developing Section; Detaching And Refitting The Developing Unit - Kyocera KM-3035 Service Manual

2FD/2FF/2FG

1-6-5 Developing section

(1) Detaching and refitting the developing unit

Follow the procedure below to replace the developing unit.
Procedure
1. Open the front cover.
2. Remove the toner container and toner
disposal tank.
3. Remove the screw and turn the developing
release lever in the direction of the arrow.
4. Remove the developing unit.
5. Replace the developing unit and refit all the
removed parts.
1-6-34
Developing release lever
Figure 1-6-62
Developing unit
Figure 1-6-63