Checking Dp Operation; Setting The Presence Or Absence Of A Key Card Or Key Counter - Kyocera KM-3035 Service Manual

2FD/2FF/2FG
Maintenance
item No.
U203

Checking DP operation

Description
Simulates the original conveying operation separately in the optional DP.
Purpose
To check the DP.
Method
1. Press the start key. The screen for selecting an item is displayed.
2. Place an original in the DP if running this simulation with paper.
3. Select the item to be operated. The selected item is displayed in reverse.
Display
ADP
RADP
ADP (NON-P)
RADP (NON-P)
4. Press the start key. The operation starts.
5. To stop continuous operation, press the stop/clear key.
Completion
Press the stop/clear key when the operation stops. The screen for selecting a maintenance item No. is
displayed.
U204

Setting the presence or absence of a key card or key counter

Description
Sets the presence or absence of the optional key card or key counter.
Purpose
To run this maintenance item if a key card or key counter is installed.
Method
Press the start key. The screen for selecting an item is displayed
Setting
1. Select the optional counter to be installed using the cursor up/down keys. The selected counter is
displayed in reverse.
Display
KEY-CARD
KEY-COUNTER
2. Press the start key. The setting is set and the screen for selecting a maintenance item No. is displayed.
Completion
To exit this maintenance item without changing the current setting, press the stop/clear key. The screen for
selecting a maintenance item No. is displayed.
1-4-44
Description
Operation
With paper, single-sided original
With paper, double-sided original
Without paper, single-sided original (continuous operation)
Without paper, double-sided original (continuous operation)
Description
The key card is installed
The key counter is installed