Displaying The Drum History; Initial Setting For The Developer; Setting Toner Loading Operation - Kyocera KM-3035 Service Manual

2FD/2FF/2FG-3.0
Maintenance
item No.
U118

Displaying the drum history

Description
Displays the past record of machine number and the drum counter.
Purpose
To check the count value of machine number and the drum counter.
Method
1. Press the start key. The screen for selecting an item is displayed.
2. Select the item and press the start key. Past record of 5 cases is displayed.
Display
MACHINE No. HISTORY
DRUM COUNT HISTORY
Completion
Press the stop/clear key. The screen for selecting a maintenance item No . is displayed.
U130

Initial setting for the developer

Description
Replenishes toner to the developer unit to a certain level from the toner container that has been installed.
Purpose
To operate when installing the machine or replacing the de veloping unit.
Method
1. Press the start key. The screen for executing is displayed.
2. Press the start key. The time that elapses until initialization is complete and whether or not toner remains in
the developing unit (0: No, 1: Yes) are displayed.
Supplement
The following data is also renewed or cleared by performing this maintenance item:
• Clearing the developing drive time (U157)
• Clearing the developing count (U158)
• Resetting the toner feed start level and toner empty detection
Completion
Press the stop/clear key after initial setting is complete. The screen for selecting a maintenance item No . is
displayed.
U144

Setting toner loading operation

Description
Sets toner loading operation after completion of copying.
Purpose
To set whether or not toner is loaded on the dr um after low density copying. Normally no change is necessary
from the initial setting.
Method
1. Press the start key. The screen for selecting an item is displa yed.
2. Select the item. The selected item is displayed in reverse.
Display
MODE0
MODE1
MODE2
Initial setting: MODE2
3. Press the start key. The value is set.
Completion
Press the stop/clear key. The screen for selecting a maintenance item No . is displayed.
1-4-38-2 1-4-40
Description
Description
Past record of machine number
Past record of drum counter
Description
Toner not loaded
Toner loaded after simplex or duplex copying
Toner loaded after simplex copying