Kyocera KM-3035 Service Manual page 297

RCL
EM
RSW
ESW
FSSW
a: The leading edge of paper (front face) turns on the eject switch (ESW), and at the same time the eject motor (EM)
starts forward rotation.
b: 40 ms after passing of the trailing edge of paper turns off the eject switch (ESW), the eject motor (EM) turns off for 50
ms and then starts reverse rotation.
c: The leading edge of paper (reverse face) turns on the eject switch (ESW), and at the same time the eject motor (EM)
turns off for 50 ms and then starts forward rotation.
d: 309 ms after passing of the trailing edge of the paper turns off the eject switch (ESW), the eject motor (EM) turns off.
Secondary paper feed end
Fwd. rotation
40 ms
Timing chart 2-1-7 Eject and switchback sections operation
Rev. rotation
50 ms
2FD/2FF/2FG
Fwd. rotation
50 ms
309 ms
2-1-23