Kyocera KM-3035 Service Manual page 78

• If the printing system was installed
20. Reinstall the printing system into the shield
cover, fastening it into place with 2 screws.
21. Reattach the rear cover with 13 screws.
22. Adhere the certification labels to the rear
cover at the locations indicated in the
illustration (only 120 V Spac.).
Printing system
Screws
Figure 1-3-124
Figure 1-3-125
Certification
labels
Figure 1-3-126
2FD/2FF/2FG
Rear cover
1-3-53