Install The Optional Paper Feeder Or Large Paper Deck; Remove The Pins Holding Light Source Units 1 And 2; Install The Original Cover Or The Dp; Install Other Optional Devices - Kyocera KM-3035 Service Manual

2FD/2FF/2FG-3.0
6. Pull upper and lower drawers out and remove the
tape holding each of the drawer lift.
*If necessary, please fix the cassette cursor with
the screws included in the machine box.

Install the optional paper feeder or large paper deck.

1. Install the optional paper feeder or large paper
deck as necessary (see page 1-3-13 to 1-3-21).

Remove the pins holding light source units 1 and 2.

1. Remove the two pins for light source unit 1 and
the pin for light source unit 2.

Install the original cover or the DP .

1. Install the original cover or DP (see page 1-3-33 when installing the DP).

Install other optional devices.

1. Install the optional devices (job separator, finisher, fax board, and/or printer board etc.) as necessary.
1-3-6
Tape
Figure 1-3-5
Light source unit 2 pin
Figure 1-3-6