Outputting A Mip-Pg Pattern; U089 Outputting A Mip - Kyocera KM-3035 Service Manual

2FD/2FF/2FG
Maintenance
item No.
U089

Outputting a MIP-PG pattern

Description
Selects and outputs the MIP-PG pattern created in the copier.
Purpose
When performing respective image printing adjustments, used to check the machine status apart from that of
the scanner with a non-scanned output MIP-PG pattern.
Method
1. Press the start key. The screen for selecting an item is displayed.
2. Select the MIP-PG pattern to be output.
3. To change the output conditions of MONO-LEVEL and 1dot-LINE, use the cursor up/down keys to change
the preset values and press the Start key to register the setting.
Display
Output density of MONO-LEVEL
1dot-LINE
4. Press the interrupt key. The copy mode screen is displayed.
5. Press the start key. A MIP-PG pattern is output.
Completion
Press the stop/clear key at the screen for selecting an item. The screen for maintenance item No. is displayed.
1-4-30
Display PG pattern to be output Purpose
GRAYSCALE
MONO-LEVEL
256-LEVEL
1 DOT-LINE
Description
To check the laser scanner unit
engine output characteristics.
To check the drum quality.
To check resolution
reproducibility in printing.
To check fine line reproducibility.
To adjust the position of the laser
scanner unit (lateral squareness)
Setting range
0 or 70
0 to 21
Initial setting
0
0