Kyocera KM-3035 Service Manual page 193

Problem
(32)
Paper jams in the
built-in finisher* dur-
ing copying (intake
jam).
Jam code 82
(33)
Paper jams in the
built-in finisher* dur-
ing copying (jam
during paper con-
veying for batch
ejection 1).
Jam code 83
(34)
Paper jams in the
built-in finisher* dur-
ing copying (jam
during paper con-
veying for batch
ejection 2).
Jam code 84
*Optional.
Causes/check procedures
Defective paper conveying
switch.
Check if the feedshift roller
or feedshift pulley is de-
formed.
Defective paper conveying
switch.
Check if the feedshift roller
or press roller is deformed.
Defective paper conveying
switch.
Check if the eject roller or
eject pulley is deformed.
Corrective measures
With 5 V DC present at CN4-9 on the finisher main PCB, check
if CN4-10 on the finisher main PCB remains high or low when
the paper conveying switch is turned on and off. If it does, re-
place the paper conveying switch.
Check visually and replace the pulley or roller if deformed.
With 5 V DC present at CN4-9 on the finisher main PCB, check
if CN4-10 on the finisher main PCB remains high or low when
the paper conveying switch is turned on and off. If it does, re-
place the paper conveying switch.
Check visually and replace the pulley or roller if deformed.
With 5 V DC present at CN4-9 on the finisher main PCB, check
if CN4-10 on the finisher main PCB remains high or low when
the paper conveying switch is turned on and off. If it does, re-
place the paper conveying switch.
Check visually and replace the pulley or roller if deformed.
2FD/2FF/2FG
1-5-19