Kyocera KM-3035 Service Manual page 134

Maintenance
item No.
U114 Setting: SELECT TEMP, HUM
1. Select either TEMP or HUM.
2. Change the setting using the cursor up/do wn keys.
Display
TEMP
HUM
3. Press the start key. The value is set, and the screen for selecting an item is displayed.
Setting: SELECT VELLUM MODE
1. Select either ON or OFF . The selected item is displa yed in reverse.
Display
ON
OFF
Initial setting: OFF
2. Press the start key. The setting is set, and the screen f o r selecting an item is displa yed.
Setting: SELECT NORMAL MODE
1. Select either MODE0 or MODE1. The selected item is displayed in reverse.
Display
MODE0
MODE1
Initial setting: MODE0
2. Press the start key. The setting is set, and the screen f o r selecting an item is displa yed.
Completion
Press the stop/clear key at the screen for selecting an item. The screen for selecting a maintenance item No . is
displayed.
U117 Checking the drum number
Description
Displays the drum number.
Purpose
To check the drum number.
Method
Press the start key. The drum number is displayed.
Completion
Press the stop/clear key. The screen for selecting a maintenance item No . is displayed.
Description
Setting range
0 to 100
0 to 999
Description
Selecting SC Whole mode when using thin paper
Not selecting SC Whole mode when using thin paper
Description
Selecting SC Whole mode when using plain paper
Not selecting SC Whole mode when using plain paper
2FD/2FF/2FG-3.0
Initial setting
20
50
1-4-38-1 1-4-39