Kyocera KM-3035 Service Manual page 302

15. Bypass paper size width switch
(BYPPWSW) ................................................ Detects the width of paper on the bypass tray.
16. Feed switch 1 (FSW1) ................................. Controls feed clutch 1 drive timing.
17. Feed switch 2 (FSW2) ................................. Controls feed clutch 2 drive timing
18. Feed switch 3 (FSW3) ................................. Controls feed clutch 3 drive timing
19. Bypass feed switch (BYPFSW) ................... Controls bypass feed clutch drive timing
20. Scanner home position switch (SHPSW) .... Detects the optical system in the home position.
21. Original detection switch (ODSW) ............... Operates the original size detection sensor.
22. Original size detection sensor (OSDS) ........ Detects the size of the original.
23. Registration switch (RSW) ........................... Controls the secondary paper feed start timing.
24. Eject switch (ESW) ...................................... Detects a paper misfeed in the fixing section.
25. Feedshift switch (FSSW) ............................. Detects a paper misfeed in the switchback section in a duplex copy.
26. Toner sensor (TNS) ..................................... Detects the toner density in the developing unit.
27. Toner container detection switch
(TCDSW) ..................................................... Detects the presence of the toner container.
28. Toner container sensor (TCS) ...................... Detects the quantity of toner in a toner container.
29. Toner disposal tank detection switch
(TDDSW) ..................................................... Detects the presence of the toner disposal tank.
30. Overflow sensor (OFS) ................................ Detects when the toner disposal tank is full.
31. Humidity sensor (HUMSENS) ...................... Detects absolute humidity.
32. Fixing unit thermistor 1 (FTH1) .................... Detects the heat roller temperature.
33. Fixing unit thermistor 2 (FTH2) .................... Detects the heat roller temperature.
34. Front cover switch (FRCSW) ....................... Detects the opening and closing of the front cover.
35. Conveying cover switch (CCSW) ................. Detects the opening and closing of the conveying cover.
36. Side cover switch (SCSW) ........................... Detects the opening and closing of the side cover.
37. Duplex paper conveying switch
(DUPPCSW) ................................................ Detects a paper jam in the duplex section.
2FD/2FF/2FG
2-2-3