14. Remove the tape securing the cushioning
material for the stapler unit, and remove the
cushioning material.
15. Remove the two fastening pins securing the
stapler unit at the bottom of the intermediate
tray unit.
16. Raise the stapler unit in the indicated
direction, and load the two stapler cartridges
into the unit.
Cushioning material
Stapler unit
Figure 1-3-162
Intermediate tray unit
Stapler
Fastening pin
unit
Figure 1-3-163
Stapler unit
Figure 1-3-164
2FD/2FF/2FG
Tape
Fastening pin
Stapler cartridges
1-3-67