Setting:density In Photo Mode; Setting:density In The Text In Fax Mode; Setting:density In The Photo In Fax Mode - Kyocera KM-3035 Service Manual

2FD/2FF/2FG
Maintenance
item No.
U093

Setting:Density in photo mode

1. Select the item to be adjusted. The selected item is displayed in reverse.
2. Adjust the setting using the cursor up/down keys.
Display
PHOTO DARKER
PHOTO LIGHTER
Increasing the setting makes the change in density larger, and decreasing it makes the change smaller.
3. Press the start key. The value is set.
4. To return to the screen for selecting an item, press the stop/clear key.

Setting:Density in the text in fax mode

1. Select the item to be adjusted. The selected item is displayed in reverse.
2. Adjust the setting using the cursor up/down keys.
Display
FAX TEXT DARKER
FAX TEXT LIGHTER
Increasing the setting makes the change in density larger, and decreasing it makes the change smaller.
3. Press the start key. The value is set.
4. To return to the screen for selecting an item, press the stop/clear key.

Setting:Density in the photo in fax mode

1. Select the item to be adjusted. The selected item is displayed in reverse.
2. Adjust the setting using the cursor up/down keys.
Display
FAX PHOTO DARKER
FAX PHOTO LIGHT.
Increasing the setting makes the change in density larger, and decreasing it makes the change smaller.
3. Press the start key. The value is set.
4. To return to the screen for selecting an item, press the stop/clear key.
Interrupt copy mode
While this maintenance item is being performed, copying from an original can be made in interrupt copy mode.
Completion
Press the stop/clear key at the screen for selecting an item. The screen for selecting a maintenance item No. is
displayed.
1-4-34
Description
Description
Change in density when manual
density is set dark
Change in density when manual
density is set light
Description
Change in density when manual
density is set dark
Change in density when manual
density is set light
Description
Change in density when manual
density is set dark
Change in density when manual
density is set light
Setting range Initial setting
0 to 3 0
0 to 3 0
Setting range Initial setting
0 to 4 2
0 to 9 2
Setting range Initial setting
0 to 6 3
0 to 6 3