Note
A basic setting should be carried out after completing the work.
♦
The roll-back function is disabled during the basic setting process.
♦
The basic setting is carried out with the ⇒ Vehicle diagnostic tester.
♦
1.15
Removing and installing tilt mechanism
for sliding sunroof
Removing
Note
Observe the position of the Bowden cables before removal to avoid any errors when installing.
– Remove front glass panel
– Remove rear glass panel
– Remove roller blind
⇒ page 218
.
⇒ page 222
.
⇒ page 244
.
Tiguan 2016 ➤ , Tiguan RUS 2017 ➤
General body repairs, exterior - Edition 01.2018
257
1. Sliding sunroof