Removing And Installing Engine Cover -Bottom- (Noise Insulation); Engine And Components In Engine Compartment (From Above And Below): Perform Visual; Check For Leaks And Damage; Panoramic Sliding Roof: Check Function, If Necessary Clean Guide Rails, Lubricate With Special - Volkswagen Touareg 2010 Manual

4.27 Removing and installing engine cover -
bottom- (noise insulation)
Procedure
Removal of engine cover -bottom- (noise insulation) can be found
in Workshop Manual under:
»General body repairs, exterior« ⇒ General body repairs, exte‐
rior; Rep. gr. 50 ; Noise insulation »Noise insulation«
Note
On some vehicles the engine compartment is fitted from below
♦
with an additional skid plate.
Removing and installing skid plate. ⇒ General body repairs,
♦
exterior ⇒ Rep. gr. 50 ⇒ Skid plate
4.28 Engine and components in engine com‐
partment (from above and below): Per‐
form visual check for leaks and damage
Perform visual check as follows:
– Check engine and components in engine compartment for
leaks and damage.
– Check lines, hoses and connections of
♦ Fuel system
♦ Cooling and heating system
♦ Lubrication system
♦ Air conditioning system
♦ Intake system
♦ And brake system
for leaks, abrasions, porosity and brittleness.
Caution
Arrange for defects to be rectified as repair measures.
If fluid loss is greater than can be expected through normal use,
determine source and rectify (repair measure).
4.29 Panoramic sliding roof: Check function,
if necessary clean guide rails, lubricate
with special grease and clean wind de‐
flector
Special tools and workshop equipment required
♦ Wet and dry cleaner VAS 5128
♦ Lithium grease G 052 147 A2
Touareg 2010 ➤
Maintenance - Edition 11.2011
4. Descriptions of work
73