♦ Removal wedge - 3409-
♦ Wedge - T10383/1-
♦ Removal pliers - 3392-
♦ Torque wrench - V.A.G 1783-
2.2
Removing and installing door trim at
front
Note
Left-hand side of vehicle shown, also applies to right-hand
♦
side of vehicle.
Saloon car shown, also applies to Estate.
♦
Removing
– Switch off ignition.
– Unclip cover -1- upwards with the help of the wedge - 3409- ,
beginning at the bottom.
– Turn clips -6- and -7- 90° and undo bolt -2-.
– Detach clip -5- and then clips -3- and -1- with the help of the
wedge - T10383/1- .
– Detach clip -6- and then clips -7- and -8- with the help of the
wedge - T10383- .
Caution
Clip -9- can only be released by pressing it at the side!
– Detach clip -10- with the help of the wedge - T10383- .
– Detach clip -4-.
Passat 2011 ➤ , Passat Variant 2011 ➤
General body repairs, interior - Edition 01.2015
135
2. Door trims