D-Link DES-1228 Reference Manual page 97

show multicast_fdb
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display multicast MAC address table:
DES-1228/ME:4#show multicast_fdb vlan default
Command: show multicast_fdb vlan default
VLAN Name : default
MAC Address : 01-00-5E-00-00-00
Egress Ports : 1-5
Mode : Static
Total Entries : 1
DES-1228/ME:4#
show fdb
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display unicast MAC address table:
DES-1228/ME:4#show fdb
Command: show fdb
Unicast MAC Address Ageing Time = 300
VID VLAN Name
---- ------------
1 default
DES-1228/ME Layer 2 Metro Ethernet Switch CLI Reference Manual
Used to display the contents of the Switch's multicast forwarding database.
show mulitcast_fdb [vlan <vlan_name 32> | mac_address <macaddr>]
This command is used to display the current contents of the Switch's multicast MAC
address forwarding database.
<vlan_name 32> − The name of the VLAN on which the MAC address resides.
<macaddr> − The MAC address that is present in the forwarding database table.
None.
Used to display the current unicast MAC address forwarding database.
show fdb {port <port> | vlan <vlan_name 32> | vlan <vidlist> mac_address
<macaddr> | static | aging_time}
This command will display the current contents of the Switch's forwarding database.
port <port> − The port number corresponding to the MAC destination address. The Switch
will always forward traffic to the specified device through this port.
<vlan_name 32> − The name of the VLAN on which the MAC address resides.
<vid> − Displays the entries for the VLANs indicated by vid list.
<macaddr> − The MAC address that is present in the forwarding database table.
static − Displays the static MAC address entries.
aging_time − Displays the aging time for the MAC address forwarding database.
None.
MAC Address
-----------------
00-00-51-43-70-00
Port Type
------ ----------------
10 Dynamic
92