D-Link DES-1228 Reference Manual page 171

DES-1228/ME:4#show auth_diagnostics ports 1
Command: show auth_diagnostics ports 1
Port number : 1
EntersConnecting
EapLogoffsWhileConnecting
EntersAuthenticating
SuccessWhileAuthenticating
TimeoutsWhileAuthenticating
FailWhileAuthenticating
ReauthsWhileAuthenticating
EapStartsWhileAuthenticating
EapLogoffWhileAuthenticating
ReauthsWhileAuthenticated
EapStartsWhileAuthenticated
EapLogoffWhileAuthenticated
BackendResponses
BackendAccessChallenges
BackendOtherRequestsToSupplicant
BackendNonNakResponsesFromSupplicant
BackendAuthSuccesses
BackendAuthFails
CTRL+C ESC q Quit SPACE n Next Page Enter Next Entry a All
show auth_session_statistics
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the current authentication session statistics for port 16 of module 1:
DES-1228/ME Layer 2 Metro Ethernet Switch CLI Reference Manual
Used to display the current authentication session statistics.
show auth_session_statistics {ports <auth_portlist | all>}
The show auth_session statistics command is used to display the current authentication
session statistics of the Switch on a per port basis.
ports <auth_portlist> − Specifies a range of ports.
all – Specifies that all ports will be viewed.
None.
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
166