D-Link DES-1228 Reference Manual page 90

Max Hops
TX Hold Count
Forwarding BPDU
Loopback Detection : Enabled
LBD Recover Time
DES-1228/ME:4#
Status 2 : STP enabled for RSTP
DES-1228/ME:4#show stp
Command: show stp
STP Bridge Global Settings
---------------------------
STP Status
STP Version
Max Age
Hello Time
Forward Delay
Max Hops
TX Hold Count
Forwarding BPDU
Loopback Detection
LBD Recover Time
DES-1228/ME:4#
Status 3 : STP enabled for MSTP
DES-1228/ME:4#show stp
Command: show stp
STP Bridge Global Settings
---------------------------
STP Status
STP Version
Max Age
Forward Delay
Max Hops
TX Hold Count
Forwarding BPDU
Loopback Detection
LBD Recover Time
DES-1228/ME:4#
show stp ports
Purpose
Syntax
Description
Parameters
DES-1228/ME Layer 2 Metro Ethernet Switch CLI Reference Manual
: 20
: 6
: Enabled
: 60
: Enabled
: RSTP
: 20
: 2
: 15
: 20
: 6
: Enabled
: Enabled
: 60
: Enabled
: MSTP
: 20
: 15
: 20
: 6
: Enabled
: Enabled
: 60
Used to display the Switch's current STP ports configuration.
show stp ports {<portlist>} {instance <value 0-8>}
This command displays the STP ports settings for a specified port or group of ports (one
port at a time).
<portlist> − Specifies a port or range of ports to be viewed. Information for a single port is
displayed. If no ports are specified the STP information for port 1 will be displayed. Users
85