D-Link DES-1228 Reference Manual page 68

config configuration
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To show the config configuration:
DES-1228/ME:4# config configuration config_id 1 boot_up
Command: config configuration config_id 1 boot_up
Success.
DES-1228/ME:4#
config configuration trap
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure SNMP traps for the configuration:
DES-1228/ME:4#config configuration trap save enable upload enable download enabl
e
Command: config configuration trap save enable upload enable download enable
Success.
DES-1228/ME:4#
DES-1228/ME Layer 2 Metro Ethernet Switch CLI Reference Manual
Used to configure the configuration ID.
config_id <value 1-2> [ delete | boot_up | active ]
Used to configure the configuration ID.
config_id<value 1-2> − Specifies the configuration ID to be used.
None.
This command is used to configure SNMP traps for the configuration.
config configuration trap {save [enable|disable] | upload [enable|disable] |
download [enable|disable]}(1)
This command is used to configure SNMP traps for the configuration.
save [enable|disable] – The user can enable or disable the save option here.
upload [enable|disable] – The user can enable or disable the upload option here.
download [enable|disable] – The user can enable or disable the downlad option here.
Only Administrator-level users can issue this command.
63