D-Link DES-1228 Reference Manual page 144

DES-1228/ME:4#show igmp_snooping
Command: show igmp_snooping
IGMP Snooping Global State
Multicast Router Only
Data Driven Learning Max Entries
VLAN Name
Query Interval
Max Response Time
Robustness Value
Last Member Query Interval
Host Timeout
Route Timeout
Leave Timer
Querier State
Querier Router Behavior
State
Multicast Fast Leave
Data Driven Learning Aged Out : Disabled
VLAN Name
Query Interval
Max Response Time
CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a All
show router_ports
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the router ports.
DES-1228/ME Layer 2 Metro Ethernet Switch CLI Reference Manual
: default
: 125
: 10
: 2
: 1
: 260
: 260
: 2
: Disabled
: Non-Querier
: Disabled
: Disabled
: RG
: 125
: 10
Used to display the currently configured router ports on the Switch.
show router_ports {vlan <vlan_name 32>} {[static | dynamic | forbidden]}
This command will display the router ports currently configured on the Switch.
<vlan_name 32> − The name of the VLAN on which the router port resides.
static − Displays router ports that have been statically configured.
dynamic − Displays router ports that have been dynamically configured.
forbidden − Displays forbidden router ports that have been statically configured.
None.
: Disabled
: Disabled
: 56
139