D-Link DES-1228 Reference Manual page 24

reset
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To restore all of the Switch's parameters to their default values:
DES-1228/ME:4#reset config
Command: reset config
Are you sure you want to proceed with system reset?(y/n)
Success.
DES-1228/ME:4#
login
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To initiate the login procedure:
DES-1228/ME:4#login
Command: login
UserName:
DES-1228/ME Layer 2 Metro Ethernet Switch CLI Reference Manual
Used to reset the Switch to the factory default settings.
reset {[config | system]} {force_agree}
This command is used to restore the Switch's configuration to the default settings
assigned from the factory.
config - If the keyword 'config' is specified, all of the factory default settings are
restored on the Switch including the IP address, user accounts, and the switch history log.
The Switch will not save or reboot.
system − If the keyword 'system' is specified all of the factory default settings are restored
on the Switch. The Switch will save and reboot after the settings are changed to default.
Rebooting will clear all entries in the Forwarding Data Base.
force_agree – When force_agree is specified, the reset command will be executed
immediately without further confirmation.
If no parameter is specified, the Switch's current IP address, user accounts, and the switch
history log are not changed. All other parameters are restored to the factory default
settings. The Switch will not save or reboot.
Only Administrator-level users can issue this command.
Used to log in a user to the Switch's console.
login
This command is used to initiate the login procedure. The user will be prompted for a
Username and Password.
None.
None.
19