D-Link DES-1228 Reference Manual page 199

show arpentry
Purpose
Syntax
Description
Parameters
Restrictions
Example Usage:
To display the ARP table:
DES-1228/ME:4#show arpentry
Command: show arpentry
ARP Aging Time : 20
Interface IP Address
------------- ---------------
System 10.0.0.0
System 10.6.51.15
System 10.22.8.50
System 10.30.28.112
System 10.39.77.24
System 10.44.8.253
System 10.53.7.12
System 10.56.85.10
System 10.67.33.67
System 10.71.77.126
System 10.73.21.11
System 10.73.60.106
System 10.90.90.90
System 10.255.255.255
Total Entries : 14
DES-1228/ME:4#
clear arptable
Purpose
Syntax
Description
Parameters
Restrictions
Example Usage:
DES-1228/ME Layer 2 Metro Ethernet Switch CLI Reference Manual
Used to display the ARP table.
show arpentry {ipif [System] | ipaddress <ipaddr> | static}
This command is used to display the current contents of the Switch's ARP table.
ipif [System] − The name of the IP interface, the end node or station for which the ARP
table entry was made, resides on.
ipaddress <ipaddr> − The network address corresponding to the IP interface name above.
static – Displays the static entries to the ARP table.
None.
MAC Address
-----------------
FF-FF-FF-FF-FF-FF
00-1D-60-E7-B5-CD
00-80-C8-DF-E8-EE
00-30-28-01-12-02
08-00-01-43-00-00
00-44-08-FD-09-09
00-50-BA-11-11-04
00-0E-A6-8F-72-EA
00-00-E2-58-DB-CF
00-04-96-20-D5-25
00-19-5B-EF-78-B5
00-00-00-11-12-13
00-21-91-21-34-03
FF-FF-FF-FF-FF-FF
Used to remove all dynamic ARP table entries.
clear arptable
This command is used to remove dynamic ARP table entries from the Switch's ARP table.
Static ARP table entries are not affected.
None.
Only Administrator-level users can issue this command.
Type
---------------
Local/Broadcast
Dynamic
Dynamic
Dynamic
Dynamic
Dynamic
Dynamic
Dynamic
Dynamic
Dynamic
Local
Dynamic
Dynamic
Local/Broadcast
194