D-Link DES-1228 Reference Manual page 244

Example usage:
To disable the System's interface gratuitous ARP log and trap:
DES-1228/ME:4#disable gratuitous_arp System trap log
Command: disable gratuitous_arp System trap log
Success.
DES-1228/ME:4#
show gratuitous_arp
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display gratuitous ARP log and trap states:
DES-1228/ME:4# show gratuitous_arp
Command: show gratuitous_arp
Send on IPIF status up
Send on Duplicate_IP_Detected
Gratuitous ARP Learning
IP Interface Name : System
Gratuitous ARP Trap/Log
Gratuitous ARP Log
Gratuitous ARP Periodical Send Interval
DES-1228/ME:4#
DES-1228/ME Layer 2 Metro Ethernet Switch CLI Reference Manual
Used to display gratuitous ARP configuration.
show gratuitous_arp {ipif <ipif_name>}
The show gratuitous_arp command is used to display gratuitous ARP configurations.
<ipif_name 12> − Interface name of L3 interface.
Only Administrator-level users can issue this command.
: Enabled
: Disabled
: Enabled
: Disabled
: Enabled
: 5
239