D-Link DES-1228 Reference Manual page 73

Example usage:
To display the switch history log:
DES-1228/ME:4#show log index 1-5
Command: show log index 1-5
Index Data
----- -------------------
00000-00-00 01:01:09
5
4 00000-00-00 00:00:14
3 00000-00-00 00:00:06
2 00000-00-00 00:00:01
1 00000-00-00 00:06:31
DES-1228/ME:4#
enable syslog
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To the syslog function on the Switch:
DES-1228/ME:4#enable syslog
Command: enable syslog
Success.
DES-1228/ME:4#
disable syslog
Purpose
Syntax
Description
Parameters
Restrictions
DES-1228/ME Layer 2 Metro Ethernet Switch CLI Reference Manual
Time Log Text
--------------------------------------------------------
Successful login through Console (Username: Anonymous)
System started up
Port 1 link up, 100Mbps FULL duplex
Spanning Tree Protocol is disabled
Configuration saved to flash (Username: Anonymous)
Used to enable the system log to be sent to a remote host.
enable syslog
The enable syslog command enables the system log to be sent to a remote host.
None.
Only Administrator-level users can issue this command.
Used to enable the system log to be sent to a remote host.
disable syslog
The disable syslog command enables the system log to be sent to a remote host.
None.
Only Administrator-level users can issue this command.
68