D-Link DES-1228 Reference Manual page 204

config mac_notification
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure the Switch's MAC address table notification global settings:
DES-1228/ME:4#config mac_notification interval 1 historysize 500
Command: config mac_notification interval 1 historysize 500
Success.
DES-1228/ME:4#
config mac_notification ports
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable port 7 for MAC address table notification:
DES-1228/ME:4#config mac_notification ports 7 enable
Command: config mac_notification ports 7 enable
Success.
DES-1228/ME:4#
DES-1228/ME Layer 2 Metro Ethernet Switch CLI Reference Manual
Used to configure MAC address notification.
config mac_notification {interval <int 1-2147483647>|historysize <int 1-500>}(1)
MAC address notification is used to monitor MAC addresses learned and entered into the
FDB.
interval <sec 1-2147483647> − The time in seconds between notifications. The user may
choose an interval between 1 and 2,147,483,647 seconds.
historysize <1-500> − The maximum number of entries listed in the history log used for
notification.
Only Administrator-level users can issue this command.
Used to configure MAC address notification status settings.
config mac_notification ports [<portlist> | all] [enable | disable]
MAC address notification is used to monitor MAC addresses learned and entered into the
FDB.
<portlist> − Specifies a port or range of ports to be configured.
all – Entering this command will set all ports on the system.
[enable | disable] – These commands will enable or disable MAC address table notification
on the Switch.
Only Administrator-level users can issue this command.
199