D-Link DES-1228 Reference Manual page 216

show authen_enable
Restrictions
Example usage:
To display all method lists for promoting user level privileges to administrator level privileges.
DES-1228/ME:4#show authen_enable all
Command: show authen_enable all
Method List Name
----------------
Permit
default
Total Entries : 2
DES-1228/ME:4#
config authen application
Purpose
Syntax
Description
Parameters
DES-1228/ME Layer 2 Metro Ethernet Switch CLI Reference Manual
all – Entering this parameter will display all the authentication login methods currently
configured on the Switch.
The window will display the following parameters:

Method List Name – The name of a previously configured method list name.

Priority – Defines which order the method list protocols will be queried for
authentication when a user attempts to log on to the Switch. Priority ranges from
1(highest) to 4 (lowest).

Method Name – Defines which security protocols are implemented, per method
list name.

Comment – Defines the type of Method. User-defined Group refers to server
groups defined by the user. Built-in Group refers to the TACACS, XTACACS,
TACACS+ and RADIUS security protocols which are permanently set in the
Switch. Keyword refers to authentication using a technique INSTEAD of
TACACS/XTACACS/TACACS+/RADIUS which are local (authentication through
the local_enable password on the Switch) and none (no authentication necessary
to access any function on the Switch).
None.
Priority Method Name
-------- -------------
1 tacacs+
2 tacacs
3 Darren
4 local
1 tacacs+
2 local
Used to configure various applications on the Switch for authentication using a previously
configured method list.
config authen application [console | telnet | ssh | http | all] [login | enable] [default |
method_list_name <string 15>]
This command is used to configure Switch configuration applications (console, telnet, ssh,
web) for login at the user level and at the administration level (authen_enable) utilizing a
previously configured method list.
application – Choose the application to configure. The user may choose one of the
following five options to configure.

console – Choose this parameter to configure the command line interface login
method.

telnet – Choose this parameter to configure the telnet login method.
Comment
------------------
Built-in Group
Built-in Group
User-defined Group
Keyword
Built-in Group
Keyword
211