D-Link DES-1228 Reference Manual page 262

config lldp basic_tlvs
Restrictions
Example usage
To configure the Switch to exclude the system name TLV from outbound LLDP advertisements on all ports:
DES-1228/ME:4# config lldp ports all basic_tlvs system_name enable
Command: config lldp ports all basic_tlvs system_name enable
Success.
DES-1228/ME:4#
config lldp dot1_tlv_pvid
Purpose
Syntax
Description
Parameters
Restrictions
Example usage
To configure the vlan name TLV from the outbound LLDP advertisements for all ports:
DES-1228/ME:4# config lldp ports all dot1_tlv_pvid enable
Command: config lldp ports all dot1_tlv_pvid enable
Success.
DES-1228/ME:4#
config lldp dot1_tlv_vlan_name
Purpose
Syntax
Description
DES-1228/ME Layer 2 Metro Ethernet Switch CLI Reference Manual
'System Name TLV'. The default state is disabled.
system_description − This TLV optional data type indicates that the LLDP agent should
transmit 'System Description TLV'. The default state is disabled.
system_capabilities − This TLV optional data type indicates that the LLDP agent should
transmit 'System Capabilities TLV'. The system capability will indicate whether the device
provides repeater, bridge, or router functions, and whether the provided functions are
currently enabled. The default state is disabled.
Only Administrator-level users can issue this command.
Used to configure an individual port or group of ports to exclude one or more of IEEE
802.1 Organizationally port vlan ID TLV data types come from outbound LLDP
advertisements.
config lldp ports [<portlist>|all] dot1_tlv_pvid [enable | disable]
This TLV optional data type determines whether the IEEE 802.1 organizationally defined
port VLAN TLV transmission is allowed on a given LLDP transmission capable port.
<portlist> − Specified a range of ports to be configured.
all − To set all ports in the system, you may use the "all" parameter.
dot1_tlv_pvid − This TLV optional data type determines whether the IEEE 802.1
organizationally defined port VLAN ID TLV transmission is allowed on a given LLDP
transmission capable port. The default state is disable.
Only Administrator-level users can issue this command.
Used to configure an individual port or group of ports to exclude one or more of the IEEE
802.1 Organizational VLAN name TLV data types from outbound LLDP advertisements.
config lldp ports [<portlist>|all] dot1_tlv_vlan_name [vlan [all | <vlan_name 32> ] |
vlanid <vidlist> ] [enable | disable]
This TLV optional data type indicates whether the corresponding Local System's VLAN
name instance will be transmitted on the port. If a port is associated with multiple VLANs
those enabled VLAN IDs will be advertised.
257