D-Link DES-1228 Reference Manual page 287

DES-1228/ME:4#disable loopdetect
Command: disable loopdetect
Success
DES-1228/ME:4#
show loopdetect
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To show loopdetect:
DES-1228/ME:4#show loopdetect
Command: show loopdetect
Loopdetect Global Settings
---------------------------
Loopdetect Status
Loopdetect Interval
Recover Time
DES-1228/ME:4#
show loopdetect ports
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To show loopdetect ports:
DES-1228/ME Layer 2 Metro Ethernet Switch CLI Reference Manual
Used to display the current loopback detection settings on the switch.
show loopdetect
Used to display the current loopback detection settings on the switch
None.
None.
: Enabled
: 20
: 60
Used to display the current per-port loopback detection settings on the switch.
show loopdetect ports [<portlist> | all]
Used to display the current per-port loopback detection settings on the switch
<portlist> − Specifies a range of ports for the loopback detection
all − Specifies all ports for the loopback detection.
None.
282